首页编程正文内容

Ubuntu新手必学：轻松实现开机自动执行指定命令的方法

编程

更新时间：2026-02-1518

admin管理员组
文章数量:1516870

概述

本文档主要记录 Ubuntu 系统使用 /etc/rc.local 设置开机指令的方法。

系统版本

Ubuntu 20.04

设置开机启动命令

1. 查看 `rc-local` 服务状态

sudo systemctl status rc-local

输出结果如下:

root@localhost:~$ systemctl status rc-local
● rc-local.service - /etc/rc.local Compatibility
     Loaded: loaded (/lib/systemd/system/rc-local.service; static; vendor preset: enabled)
    Drop-In: /usr/lib/systemd/system/rc-local.service.d
             └─debian.conf
     Active: inactive (dead)
       Docs: man:systemd-rc-local-generator(8)

2. 设置 `rc-local` 服务开机启动

sudo systemctl enable rc-local

注: Ubuntu 20.04不能直接启用 rc-local 服务，会报错，需要手动创建 rc-local 服务文件。指令报错如下:

root@localhost:~$ sudo systemctl enable rc-local
[sudo] password for simple:
The unit files have no installation config (WantedBy=, RequiredBy=, Also=,
Alias= settings in the [Install] section, and DefaultInstance= for template
units). This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:
• A unit may be statically enabled by being symlinked from another unit's
  .wants/ or .requires/ directory.
• A unit's purpose may be to act as a helper for some other unit which has
  a requirement dependency on it.
• A unit may be started when needed via activation (socket, path, timer,
  D-Bus, udev, scripted systemctl call, ...).
• In case of template units, the unit is meant to be enabled with some
  instance name specified.

3. 手动创建系统自启动服务

sudovim /etc/systemd/system/rc-local.service

输入以下内容:

[Unit]
 Description=/etc/rc.local Compatibility
 ConditionPathExists=/etc/rc.local
[Service]
 Type=forking
 ExecStart=/etc/rc.local start
 TimeoutSec=0
 StandardOutput=tty
 RemainAfterExit=yes
 SysVStartPriority=99
[Install]
 WantedBy=multi-user.target

4. 创建 `rc.local` 文件

sudovim /etc/rc.local

输入以下内容:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
# Print the IP address
# _IP=$(hostname -I) || true
# if [ "$_IP" ]; then
#   printf "My IP address is %s\n" "$_IP"
# fi
exit 0

5. 设置 `rc.local` 文件权限

sudochmod +x /etc/rc.local

6.添加开机启动命令

以删除某条冗余静态路由为例，例如，现在有双网卡环境，需要将其中一张网卡用于内网数据传输，另外一张网卡用于访问互联网数据传输,但是在配置完成后，发现内网数据传输正常，但是互联网数据传输异常，经过排查发现，是因为在配置内网网卡时，误将内网网卡的默认网关设置为了内网网关，导致互联网数据传输异常，因此需要删除该条冗余静态路由。删除指令为 sudo route del -net 0.0.0.0 dev enp0s8 ,现在希望在开机时自动执行该指令，因此需要将该指令添加到 rc.local 文件中。

sudovim /etc/rc.local

在 exit 0 前添加以下内容:

sudo route del -net 0.0.0.0 dev enp0s8

7.启用 `rc-local` 服务

sudo systemctl start rc-local
sudo systemctl enable rc-local

8.查看 `rc-local` 服务状态

sudo systemctl status rc-local

9.重启系统

sudoreboot

系统完成重启后，可查看路由表，发现冗余静态路由已被删除。

本文标签：启动命令编程网数据传

版权声明：本文标题：Ubuntu新手必学：轻松实现开机自动执行指定命令的方法内容由网友自发贡献，该文观点仅代表作者本人，转载请联系作者并注明出处：https://www.betaflare.com/biancheng/1771114605a3261903.html，本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容，一经查实，本站将立刻删除。