admin管理员组文章数量:1516870
- 进入初始化配置对话:
Continue with configuration dialog? [yes/no]: yes 这一步直接no就可以跳过
- 进入基本管理配置:
Would you like to enter basic management setup? [yes/no]: yes
- 输入路由器的名称:
Enter host name [Router]: r1
- 输入密码(加密显示):
Enter enable secret: 123456
- 输入密码(不加密显示):
Enter enable password: 123
- 输入虚拟终端密码(防止未经授权的用户通过console口以外的口访问路由器):
Enter virtual terminal password: 123
- 是否设置snmp(简单网络管理协议):
Configure SNMP Network Management? [no]:yes
- 输入要设置的接口:
management network from the above interface summary: fastethernet0/0
- 是否为这个端口配置ip:
Configure IP on this interface? [yes]: yes
- 输入ip地址:
IP address for this interface: 192.168.1.1
- 输入网关:
Subnet mask for this interface [255.255.255.0] : 255.255.0.0
[0] Go to the IOS command prompt without saving this config.
[1] Return back to the setup without saving this config.
[2] Save this configuration to nvram and exit.
选择2保存设置
Enter your selection [2]: 2
Press RETURN to get started!
版权声明:本文标题:路由器的神秘面纱:如何通过SWF对话开启Adobe Flash Player的配置 内容由网友自发贡献,该文观点仅代表作者本人, 转载请联系作者并注明出处:https://www.betaflare.com/biancheng/1772190296a3272060.html, 本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如发现本站有涉嫌抄袭侵权/违法违规的内容,一经查实,本站将立刻删除。


发表评论